Orb-DIM is a Wi-Fi smart dimmer wall switch with Matter. It dims LED, incandescent and halogen lamps smoothly and without flicker, lets you set brightness in 1% steps from the app or by voice, shows real-time power use and protects the circuit against overload and overheating.
Max load
400 W resistive / 200 VA LED
Protocol
Matter over Wi-Fi
Main features
Full-range dimming
From 0% to 100%
Automatic and manual calibration tune the dimmer to your lamps for smooth, natural fades with no flicker.
Wide compatibility
Works with most dimmable lamps
Supports dimmable LEDs, incandescent and halogen lamps and dimmable electronic transformers.
Power metering
See your savings while dimming
Live power readings show how much energy the light uses, so you can see the effect of lower brightness.
Matter
Every ecosystem, one dimmer
Add it with the Matter code to Apple Home, Google Home, Alexa or SmartThings and control the brightness from any of them.
Safety
Engineered for protection
Overload, overcurrent and overheat protection monitor the circuit continuously for safe operation.
Compatibility
MatterApple HomeGoogle HomeAmazon AlexaSmartThingsHome AssistanteWeLink
Good to know
Uses 2.4 GHz Wi-Fi. For Matter apps you need a Matter controller (for example HomePod, Nest hub, Echo or a SmartThings hub); without one, use the free eWeLink app. A neutral wire is required. Mains installation: must be wired by a qualified electrician with the power switched off.
Specifications
| Model | MINI-DIM-E |
|---|
| MCU | ESP32-C3 |
|---|
| Rating | 220-240V~ 50Hz 400W Max Resistive load |
|---|
| LED load | 200VA |
|---|
| Wi-Fi | IEEE 802.11b/g/n 2.4GHz |
|---|
| Net weight | 83g |
|---|
| Dimensions | 86x86x33.7mm |
|---|
| Casing material | PC |
|---|
| Working temperature | -10℃~40℃ |
|---|
| Working humidity | 5%~95% RH, non-condensing |
|---|
| Certifications | CE/RoHS |
|---|